What're your concepts about How to Troubleshoot and Repair an Electric Water Heater?
Numerous contemporary houses utilize an electrical hot water heater for their heater, because of its comfort as well as simplicity of use. However, just like any other electric devices, troubles might develop with its usage, unexpectedly. It can be really irritating to awaken to a chilly shower rather than a hot one or having your bath with water that isn't warm sufficient and even too warm. Whatever the situation may be, hot water heater troubles can be rather stressful. Thankfully, we have actually made a listing of possible solutions to your hot water heater problems. There are a variety of aspects that can trigger a lot of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for security. Whatever the problem is, getting it dealt with must not position too much of a concern if you comply with these steps:
Examine Your Power Supply:
As standard as this might seem, it is really needed. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water suddenly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the concern, just turn it on and off once again. Replace any kind of damaged or damaged fuse. Check the appliance with power after these adjustments to see if it's now functioning.
Inspect the Burner in the Water Heater:
If it's not a power problem, after that try looking into your heating element if it is still functioning. Evaluate each of your burner to make sure the trouble isn't with any of them. If any of them is malfunctioning, replace that component and then inspect whether the warm water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot enough, you might require to examine the temperature setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open the gain access to panel and also press the red switch for temperature reset over the thermostat. This must help warm the water. Transform the circuit breaker back on and inspect if the issue has been solved.
Call A Professional:
If after replacing all damaged parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to call a specialist plumber for a specialist opinion. The problem with your heating unit could be that the cold and hot faucets have actually been switched or it may be undersized for the quantity of warm water required in your house. Whatever the situation might be, an expert plumber would certainly assist fix the trouble.
Conclusion
Water heater problems are not constantly significant. Many of them are due to small concerns like a blown fuse or damaged heating element. Changing the damaged components need to suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your nearby plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our topic on How to Troubleshoot and Repair an Electric Water Heater. Thank you for taking the time to read our post. For those who liked our page kindly make sure you remember to pass it around. Many thanks for going through it.
Get Your Estimate Now